This firmware update is applicable to the GC3 and LP device lines, including:
GC3
GC3s
Launch Pro
Launch Pro Indoor (LPi)
This process requires the device to be connect to the internet in order to download and install the firmware update. This is not done through a computer through a manually initiated download and installation.
Fixed issue with devices showing W33/V24 asserts on boot up.
Fixed LaunchPro splash screen freezes seen after FW update
Fixes issues with removing and hot swapping Ethernet cables on the device
Fixed LaunchPro splash screen appearing on the GC3
Fixed FSX Play ball positioning is off when ball is placed in the left hand zone
New Bluetooth debugging features
GC3 & Launch Pro Firmware v2.2.0.13
Revamped accelerometer. The PLM was displaying averaged, uncorrected values. The fix displays the fully smoothed/averaged, compensated and offset values
Resolved issue with error codes
GC3/LPs now send a handedness change event to the host App when the handedness changes by a button press
Battery consumption was reporting 1/2 the actual consumption rate. This has been resolved to show the actual consumption rate.
Resolved issue with manual firmware update
GC3 & Launch Pro Firmware v2.0.3.6
Restored USB Function For Users Which Lost Connection Due To Windows Update
Misc Minor Bug Fixes
GC3 & Launch Pro Firmware v1.17.0.94
Update: Barometer Can Now Be Enabled (Select Enable/Disable From Device LCD Settings)
Update: Ball Data - Spin Axis Data Unlocked Without Subscription Required.
GC3 & Launch Pro Firmware v1.16.0.93
Updated: Purchased Club Addon - When Purchased, Club Data Fields will Display Without Subscription
Resolved: Memory Bug
Improvements: Firmware Update Efficiency
GC3 & Launch Pro Firmware v1.15.0.92
New Feature: Battery Calibration Health Check on Boot
Detects bad calibrations from older or current releases after FW update
Fixed calibration mode log spamming
Fixed calibration edge case condition where the unit would shut down due to low charge percentage before presenting the START button.
GC3 & Launch Pro Firmware v1.14.4.91
Improvement in use for outdoor & yellow ball/tall grass
Added Locked Icon To Represent Connection To Locked Networks
Improved Network Handling
Misc Internal Facing Operations Updates
Misc Bug Fixes
GC3 & Launch Pro Firmware v1.9.0.77
Further Function Developed For GC3 Lite
Various Backend Improvements
GC3 & Launch Pro Firmware v1.8.2.76
Enabled Ball Only Function for GC3 Lite
Additional Improvements for Ball Lock In Far Corners Of Hitting Zone
Updated FSX LIVE Function For Data Reporting To Customer Portal
GC3 & Launch Pro Firmware v1.7.0.73
Substantial Improvement To The Ball Lock/Unlock Function.
Resolved Unlock Occurrence During Club Swing
Bug Fix For Rare Crash On Ball Lock.
GC3 & Launch Pro Firmware v1.6.0.72
Improved USB Connection Communication Times
Improved WiFi Connection & Validation Process
Improved Ball Lock & Shot Capture Function
GC3 & Launch Pro Firmware v1.5.0.2
Critical Backend Update
GC3 & Launch Pro Firmware v1.4.1.70
Resolved, Improved, & Optimized Several Concerns Related To The Device’s Accelerometer
Resolved, Improved & Optimized Wi-Fi Capabilities
Resolved Incorrect LCD Data Page Behavior
Improved Device Shot Processing
Optimized Battery “Charging” Flag
GC3 & Launch Pro Firmware v1.4.0
Improved Ball Lock Function.
Launch Pro Basic and Silver subscription feature unlocks for:
Ball Spin Axis.
Club Data.
Barometer.
Club Speed Now Shown As A Decimal.
Improved WiFi Function.
LCD Menu Disappears
Bug Fix: Improved Handling If Device Function Freezes For Any Reason.
Improved Battery Reporting & Charging Function
GC3 & Launch Pro Firmware v1.3.15.68:
Fix For The Ball Lockup Issue
Fix For The B4 Error
Numerous WiFi Function Updates
Bluetooth On/Off Switch
Fix For The Real Time Clock Function
Included Updates From Previous Releases:
Improved USB Connection Function
Improved Ethernet Connection Function
Improved WiFi Connection Function
Improved Accelerometer Function
Improved Temperature Function
Please Note: The continued use of old software/firmware or reversion of software/firmware is not recommended unless specifically requested by a service representative.